CNC Plasma Cutting Machines

Plasma cutting machine

Plasma cutting is a process used to cut steel and other metals (or sometimes other materials) using a plasma torch. In this process, an inert gas (in some units, compressed air) is blown at high speed out of a nozzle; at the same time an electrical arc is formed through that gas from the nozzle to the surface being cut, turning some of that gas to plasma. This plasma is sufficiently hot to melt the metal and moving sufficiently fast to blow molten metal away from the cut. The result is very much like cutting butter with a hot jet of air. Plasma cutters have also been used in CNC machinery. Manufacturers such as Retro Systems and Plasma CAM build CNC cutting tables, some with the cutter built in to the table. The idea behind CNC tables is to allow a computer to control the torch head making clean sharp cuts. Modern CNC plasma equipment is capable of multi-axis cutting of thick material, allowing opportunities for complex welding seams on CNC welding equipment that is not possible otherwise. For thinner material cutting, plasma cutting is being progressively replaced by laser cutting, due mainly to the laser cutter’s superior hole-cutting abilities. A specialized use of CNC controlled Plasma Cutters has been in the HVAC industry. Software will process information on ductwork and create flat patterns to be cut on the cutting table by the plasma torch. This technology has enormously increased productivity within the industry since its introduction in the early 1980’s. A typical HVAC cutting machine is Plasma Automation’s Vicon Cutting Table Plasma cutters use a number of methods to start the pilot arc, depending on the environment the unit is to be used in and its age. Older cutters use a high voltage, high frequency circuit to start the arc. This method has a number of disadvantages, including risk of electrocution, difficulty of repair, sparkgap maintenance, and the large amount of radio frequency emissions. Plasma cutters working near sensitive electronics, such as CNC hardware or computers, use the contact start method. The nozzle and electrode are in contact. The nozzle is the cathode, and the electrode is the anode. When the plasma gas begins to flow, the nozzle is blown forward. A third, less common method is capacitive discharge into the primary circuit via a Silicon Controlled Rectifier. PC: plasma cutting machines also plasma systems cutting or plasma.
Advertisements

Tags: , , , , ,

One Response to “CNC Plasma Cutting Machines”

  1. Anonymous Says:

    Has anyone heard of CNC Cutting Machines? There table looks nice, but I don’t know anything about them. http://www.cnccuttingmachines.com

    I have been afraid to use torchmate and can’t get a response for pricing from them. They don’t email me back! UGH!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


%d bloggers like this: